TP.ATM30.PB801 1GB 8GB SOFTWARE

Overview

The TP.ATM30.PB801 is an Android-based FHD ($1920\times1080$) smart LED TV combo board that relies on dedicated eMMC firmware to drive its power sequence, panel mappings, and network stack. Technicians frequently use stock USB firmware and bin dump files for this board to restore bricked units, fix corrupted boot partitions, and adapt the mainboard to different Full HD or HD panel displays.

Flashing the correct firmware restores full access to the board's onboard Wi-Fi drivers, RJ45 LAN interface, HDMI, VGA, and USB ports. Whether you are recovering a board stuck on the Android boot logo or remapping LVDS signals for a replacement panel, having the correct upgrade_30.bin software is essential for servicing this board.

Software Installation Steps

Download the required software as per your resolution.
Rename the file as per your firmware name.
- allupgrade_aml920_8G_1G_mxl661_sos.img
- allupgrade_aml920_8G_1G_multi_sos.img
- allupgrade_aml920android9_801F_8G_1G_multi_sos.img
Format a USB in fat32 format.
Copy the file into USB root directory.
Attach it to the TV USB port.
Turn on the power to the board.
The motherboard will automatically detects the software and the installtion will automatically starts.
After the software successfully installed unplug the USB.
Enjoy

Note:

Smart Led Zone is not responsible for any damage/loss by installing/updating any firmware/software.
Updating/Installing the firmware/software may contain risk.

Frequently Asked Questions

How do I fix the TP.ATM30.PB801 board when it is stuck on the boot logo?

Reflashing the clean USB stock firmware (upgrade_30.bin) clears corrupted boot partitions, resolving constant restart loops and freezing on the Android startup screen.

Why is my TP.ATM30.PB801 board stuck on a red standby light, and how can I fix it?

A software-locked standby state prevents the board from powering on via remote or keypad; forcing a USB firmware update clears the lock and wakes up the motherboard.

How do I fix an upside-down or inverted picture on the TP.ATM30.PB801 after replacing the panel?

Open the service menu using Menu + 1147 or Input + 2580, navigate to Panel Settings, and change the Mirror Option (or Flip/Rotate) from ON to OFF.

How do I fix a black screen with working audio on the TP.ATM30.PB801?

If the backlight lights up and sound plays but no display appears, reflashing the stock software re-initializes the board's LVDS video output drivers.

Overview

Software Installation Steps

Download the required software as per your resolution.
Rename the file as per your firmware name.
- allupgrade_aml920_8G_1G_mxl661_sos.img
- allupgrade_aml920_8G_1G_multi_sos.img
- allupgrade_aml920android9_801F_8G_1G_multi_sos.img
Format a USB in fat32 format.
Copy the file into USB root directory.
Attach it to the TV USB port.
Turn on the power to the board.
The motherboard will automatically detects the software and the installtion will automatically starts.
After the software successfully installed unplug the USB.
Enjoy

Note:

Smart Led Zone is not responsible for any damage/loss by installing/updating any firmware/software.
Updating/Installing the firmware/software may contain risk.