DS-7A08HGHI-F1 Bios dump file Download [100% Tested]
Uploaded: September 13, 2026
Updated: September 13, 2026
15 Downloads
40 Views
Technical Specifications
| Model | DS-7A08HGHI-F1 |
| PCB | DS-80257 P REV 1.2 |
| DVR password | admin@1234 |
| Display Output | Up-to 1920×1080 Full HD |
| Storage Capacity | Supports a single internal hard drive up to 6 TB |
Overview
The Hikvision DS-7A08HGHI-F1 (often branded under the Eco Series) is an 8-channel digital video recorder (DVR) designed for analog and Turbo HD surveillance setups. It serves as an entry-level, cost-effective solution for small offices or homes.
HIKVISION DS-7A08HGHI-F1 ECO
Common Problems Fixed
- Flashing the Correct BIOS can solve the following issues:
- DVR/NVR does Not Power on Properly (No lights, no beeps, Nothing happens).
- DVR/NVR System Restarts Automatically in a loop
- X No Display /// Blank Screen
- DVR/NVR fan runs at full speed constantly
- DVR gets stuck in a LOGO (BIOS Recovery Mode)
Note:
- Smart Led Zone Team is not responsible for any type of damage/loss as a result of Uploading/Downloading the firmware.
- Software Firmware file 100% tested by Smart Led Zone Team.
Download Firmware
100% Free Download
Download Firmware*This button will redirect you to the download link.
Frequently Asked Questions
How do I add or pair a Wi-Fi USB adapter to this DVR?
To use Wi-Fi, you must flash a compatible firmware version that adds wireless driver layers, then insert an approved USB Wi-Fi dongle directly into the rear USB port.
What should I do if the DVR stays stuck on the Hikvision boot logo screen?
A static logo hang typically points to an initialized loop error caused by corrupted system firmware or a failing internal hard drive partition.
How can I reset a forgotten administrator password or pattern lock?
You can unlock the device locally by executing a secure password recovery file through the official Hikvision SADP desktop software utility.
Why are some connected cameras showing a "No Video" black screen error?
A blank display channel means the current encoding mode of your analog camera is clashing with the input signal standard configured on that specific BNC port.
More Like This
EcoStar Smart TV CX-42U863 6683M6C1 Firmware Download
Download EcoStar CX-42U863 6683M6C1 firmware for logo stuck, boot loop and black screen issues. Get the USB firmware and repair your TV.
5 Downloads
N.H352.801 V6 firmware download
N.H352.801 V6 firmware download for stuck logo, boot failure and black screen. Get the HiV352ESAUpgrade.bin file and follow the USB update guide.
9 Downloads
TP.SK535.PB802 Firmware Bin File 1G+8G Download
TP.SK535.PB802 Android smart TV firmware — fixes stuck boot, no WiFi & dead screen. 1GB+8GB bin file download, USB installable. Get it here.
9 Downloads
DS-7208HUHI-F2 S Bios dump file Download
Download Hikvision DS-7208HUHI-F2/S BIOS dump for DS-80255_P board repair, including no-display and dead DVR recovery.
5 Downloads
TCL L32D3000A USB update Software Download
Download TCL L32D3000A USB firmware for RD853V-AP main board, including software details, update steps and compatibility information.
22 Downloads